• Acta-Back Deep wings are width & angle adjustable up to 2".
• Deepback wings have a thin profile for greater range of motion
• Patented moldable aluminum stays conform and support back.
• Provides pelvic and scapular relief.

• Patented Compass Hardware quickly installs to wheelchair and easily adjusts for depth, height, and angle while the user remains seated.
• Lightweight durable aluminum shell comes with head support holes.
• Three layer foam construction including Visco Surface.
• Available with two fabric options: Comfort-Tek and Stretch-Air.

• Patented moldable aluminum stays conform and support the user’s back.
• Complete with patented Compass® or Power Mount Hardware.
• Durable aluminum shell comes with head support holes.
• Aluminum shell comes with lateral trunk support hardware slots.
• Three layer foam construction, including comfortable Visco surface layer.
• BodiLink™ Head Support (E0955) and Hardware (E1028) are optional and available.
• Back design offers inclusive lower thoracic trunk supports providing great pelvic support while not limiting the user’s upper thoracic range of motion.
• Comes standard with moldable stays.

• Designed to effortlessly adjust, the Boa® closure system brings comfort and support to the lower and upper thoracic regions.
• With the Boa® reel and cable system, equal and stable pressure distribution is accomplished in an “off the shelf” back design.

• The open back frame design gives the ability to off-load the pressure typically seen on spinal deformities through the back frame opening.
• BodiLink™ Head Support (E0955) and Hardware (E1028) are optional and available.
• Available head support attaches through the use of a bracket giving the necessary clearances to accommodate more aggressive deformities.
• Lateral trunk supports (E0956) are optional and available.

• Integrated trunk wings attach to a planar aluminum back support shell are adjustable for angle, height, and up to a total of 3” of width for standard wings and 1.5” for pediatric wings to create a custom supportive shape.

• Moldable stays included for positioning, support, pressure redistribution and on-the-spot customization for a variety of spinal curvatures and changes in conditions.
• Moldable stays on the backside of the two layer foam pad can be molded to support lumbar, scoliosis and kyphosis needs.
• Moldable stays are offset from center of the back, removing pressure points from the spine.
• Comes with integrated chest harness strap guides.
• Durable aluminum shell comes with pre-drilled 2” x 1” head support hole pattern (BodiLink™ Head Support).
• Compatible with lateral trunk support hardware. A total of 11” of pad width adjustment (5.5” per side) & over 5” of height adjustment. Lateral trunk supports (E0956) are optional & available.

• Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanter.
• Deep lateral and medial leg contours promote postural alignment.
• Coccyx relief cutout eliminates pressure on the tailbone and spine.
• Non-skid bottom fabric offers hook and loop attachment.
• Constructed with dual density foam, a molded foam base, and Quadra3D® Gel pack.

QUADRA3D GEL PACK

The pressure-relieving Quadra3D gel pack reduces shear forces and heat build-up. Includes four three-dimensional compartments that evenly distributes gel under the seated surface.

• Deep lateral and medial leg contours promote postural alignment.
• Tapered leg adductors increase in width near the back of the cushion to give support to the greater trochanters.

• Two layers of foam, a contoured molded base foam with a layer of memory foam, provide comfort and skin protection.
• Comes standard with non-skid bottom and hook and loop attachment.

• Modify the rear fingers of the insert using your hand or the provided bending tool.
• Adjust the insert to address the patient’s side lean or tilted pelvis (Obliquity).
• Adjust the insert to address the patient’s rotated or windswept hips/legs.

Shear Reduction Zone

• Specifically designed to reduce the risk of Decubitus Ulcer formation and also promotes the healing process of existing problem areas.

• Reduces the risks of Decubitus Ulcers forming underneath the weight bearing bony prominences by greatly reducing the effects of shear forces, a known contributor to the breakdown of tissue.
• In conjunction with a very low peak and average pressure readings on a cushion, the GlideWear shear reduction panel acts as a great secondary approach to ulcer prevention.

Micro-Climate Control

• The GlideWear shear reduction panel is made with a 100% breathable material allowing for micro-climate control at the cushion surface.

Improved Comfort

• Reduction of shear forces allows for a more comfortable seating surface for the user.